STANDARD SPECIFICATIONS
Driving Belts - 3⁄16" diameter round urethane "O" rings from drive shaft to tread rollers.
Bed - 7" x 1-1⁄2" x 12 gauge powder painted formed steel channel frame with heavy duty cross braces and splice plates.
Rollers - 1.9" diameter x 16 gauge galvanized steel tread rollers with 7⁄16" hex shaft and sealed, greased for life bearings, spaced on 3" centers.
Sensing Device - NEMA 1 photoelectric sensor in each zone detects presence of product and activates accumulation feature in the trailing zone if upstream zone is occupied.
Power Supply - 120 VAC power supply controls accumulation feature with 24 VDC output.
Power supply will control 50 accumulation zones.
Air Requirements - 20 to 35 psi recommended operating pressure with free air consumption of .0062 cu. ft. per sensor operation.
Accumulation Zones - 24", 30", or 36" long, air operated. Conveyor frame length changes with zone lengths. Note: Zone length must be evenly divisible by roller centers.
Filter/Regulator - Supplied loose for mounting to conveyor side frame, with 3⁄8" NPT ports.
Guard Rails - 1-1⁄2" x 1-1⁄2" x 12 guage galvanized guard rails - both sides.
NOTE: Product contact with guard rails will affect product flow.
Floor Supports - Adjustable 31-1⁄2" to 45-1⁄2" from floor to top of tread roller.
One support supplied at each end of conveyor and at each bed joint.
Drive - 2 foot module with motor and reducer. Drive module will be bolted to intermediate section.
Drive Shaft - 1" diameter steel shaft, driven by motor and reducer, runs full length of conveyor.
Chain coupling supplied at bed joints to couple sections together.
Drive Spools - Delrin spools located on drive shaft supplies driving power to tread rollers.
Drive Shaft Bearings - Sealed, prelubricated, self aligning, precision ball bearings on drive shaft.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1⁄2 HP 230/460/3-60 TE motor.
Drive Guard - Expanded metal guard full length of conveyor covers drive shaft and other moving drive components.
Conveying Speed - 60 FPM constant.
Capacity - 15 lbs. per tread roller maximum. Not to exceed Load Capacity Chart.
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).
Bed - 7" x 1-1⁄2" x 12 gauge powder painted formed steel channel frame with heavy duty cross braces and splice plates.
Rollers - 1.9" diameter x 16 gauge galvanized steel tread rollers with 7⁄16" hex shaft and sealed, greased for life bearings, spaced on 3" centers.
Sensing Device - NEMA 1 photoelectric sensor in each zone detects presence of product and activates accumulation feature in the trailing zone if upstream zone is occupied.
Power Supply - 120 VAC power supply controls accumulation feature with 24 VDC output.
Power supply will control 50 accumulation zones.
Air Requirements - 20 to 35 psi recommended operating pressure with free air consumption of .0062 cu. ft. per sensor operation.
Accumulation Zones - 24", 30", or 36" long, air operated. Conveyor frame length changes with zone lengths. Note: Zone length must be evenly divisible by roller centers.
Filter/Regulator - Supplied loose for mounting to conveyor side frame, with 3⁄8" NPT ports.
Guard Rails - 1-1⁄2" x 1-1⁄2" x 12 guage galvanized guard rails - both sides.
NOTE: Product contact with guard rails will affect product flow.
Floor Supports - Adjustable 31-1⁄2" to 45-1⁄2" from floor to top of tread roller.
One support supplied at each end of conveyor and at each bed joint.
Drive - 2 foot module with motor and reducer. Drive module will be bolted to intermediate section.
Drive Shaft - 1" diameter steel shaft, driven by motor and reducer, runs full length of conveyor.
Chain coupling supplied at bed joints to couple sections together.
Drive Spools - Delrin spools located on drive shaft supplies driving power to tread rollers.
Drive Shaft Bearings - Sealed, prelubricated, self aligning, precision ball bearings on drive shaft.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1⁄2 HP 230/460/3-60 TE motor.
Drive Guard - Expanded metal guard full length of conveyor covers drive shaft and other moving drive components.
Conveying Speed - 60 FPM constant.
Capacity - 15 lbs. per tread roller maximum. Not to exceed Load Capacity Chart.
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).
• Zero pressure accumulation
• Clean room installation
• Easy installation
• True product singulation
• No mechanical sensor rollers
• Photo eye controlled
• Clean room installation
• Easy installation
• True product singulation
• No mechanical sensor rollers
• Photo eye controlled
Applications / Features:
MODEL "190LSE"
Line Shaft Live Roller
Photo Eye Controlled Acumulator
Line Shaft Live Roller
Photo Eye Controlled Acumulator
Horizontal Powered
STANDARD SPECIFICATIONS
Engineering Data
Inclined Powered
