Horizontal Powered
STANDARD SPECIFICATIONS
Driving Belts - 3⁄16" diameter round urethane "O" rings from drive shaft to tread rollers.
Bed - 7" x 1-1⁄2" x 12 gauge powder painted formed steel channel frame with heavy duty cross braces and splice plates.
Rollers - 1.9" diameter x 16 gauge galvanized steel tread rollers with 7⁄16" hex shaft and sealed, greased for life bearings, spaced on 3" centers.
Floor Supports - Adjustable 31-1⁄2" to 45-1⁄2" from floor to top of tread roller.
One support supplied at each end of conveyor and at each bed joint.
Drive - 2 foot module with motor and reducer. Drive module will be bolted to intermediate section.
Drive Shaft - 1" diameter steel shaft, driven by motor and reducer, runs full length of conveyor.
Chain coupling supplied at bed joints to couple sections together.
Drive Spools - Delrin spools located on drive shaft supplies driving power to tread rollers.
Drive Shaft Bearings - Sealed, prelubricated, self aligning, precision ball bearings on drive shaft.
Speed Reducer - C-Face mounted, heavy duty worm gear reducer.
Motor - 1⁄2 HP 230/460/3-60 TE motor.
Drive Guard - Perforated metal guard full length of conveyor covers drive shaft and other moving drive components.
Conveying Speed - 60 FPM constant.
Capacity - 15 lbs. per tread roller maximum. Not to exceed Load Capacity Chart.
Bed - 7" x 1-1⁄2" x 12 gauge powder painted formed steel channel frame with heavy duty cross braces and splice plates.
Rollers - 1.9" diameter x 16 gauge galvanized steel tread rollers with 7⁄16" hex shaft and sealed, greased for life bearings, spaced on 3" centers.
Floor Supports - Adjustable 31-1⁄2" to 45-1⁄2" from floor to top of tread roller.
One support supplied at each end of conveyor and at each bed joint.
Drive - 2 foot module with motor and reducer. Drive module will be bolted to intermediate section.
Drive Shaft - 1" diameter steel shaft, driven by motor and reducer, runs full length of conveyor.
Chain coupling supplied at bed joints to couple sections together.
Drive Spools - Delrin spools located on drive shaft supplies driving power to tread rollers.
Drive Shaft Bearings - Sealed, prelubricated, self aligning, precision ball bearings on drive shaft.
Speed Reducer - C-Face mounted, heavy duty worm gear reducer.
Motor - 1⁄2 HP 230/460/3-60 TE motor.
Drive Guard - Perforated metal guard full length of conveyor covers drive shaft and other moving drive components.
Conveying Speed - 60 FPM constant.
Capacity - 15 lbs. per tread roller maximum. Not to exceed Load Capacity Chart.
• Low pressure accumulation
• Clean room installation
• Economical transportation conveyor
• Assembly conveyor
• Clean room installation
• Economical transportation conveyor
• Assembly conveyor
Applications / Features:
MODEL "190LS"
Line Shaft Live Roller Acumulator
Line Shaft Live Roller Acumulator
STANDARD SPECIFICATIONS
Engineering Data
Inclined Powered
